Atlona AT-HDVS-150-TX-WP Wall Plate Switcher 1-HDMI 1-VGA Inputs x 1-HDBaseT Output & POE 2 Gang US

HDMI & VGA Wall Plate Switcher with HDBaseT Output

The AT-HDVS-150-TX-WP is a HDMI & VGA Wall Plate Switcher with HDBaseT Output. It features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, US or UK two-gang wall plate. An optional face plate without buttons is also available (AT-HDVS-TX-WP-NB). Designed as a remote input device for the AT-UHD-CLSO-824 matrix switcher, the AT-HDVS-150-TX-WP combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200 video, and control signals can be extended up to 230 feet (70 meters). The switcher enables auto display on/off, auto-switching, along with other features. The switcher receives power from the AT-UHD-CLSO-824 using Power over Ethernet. The AT-HDVS-150-TX fits inside any 40 mm deep two-gang electrical box or mud ring and is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources.

Remote Input Extension

The Atlona AT-HDVS-150-TX-WP switcher expands the input capabilities of the AT-UHD-CLSO-824. Each remote switcher provides input access for up to two devices with controls for input selection and can control the power state of a display or projector when used with a third party control system. The HDVS series is designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integrator benefits

The AT-HDVS-150-TX-WP is ideal for professional installation in:

• Education environments - The wall plate switcher is placed in furniture or is wall-mounted for use with a laptop and document camera. Auto-switching technology selects the active source input and routes the signal via HDBaseT to the switcher downstream.
• Corporate environments - The wall plate switcher is wall-mounted near a boardroom conference table or furniture-mounted to allow presenters to easily connect to the system. When integrated with a control system, commands can be sent to activate a display from the front panel of the switcher.

Features

US , 2-gang wall plate

• Shallow, 1.5 in (40 mm) deep wall plate simplifies integration with recessed RJ-45 connector
• Attractive alternative to table-top boxes for placement near presenter's station

2×1 HDBaseT switcher

• Features an HDMI input plus VGA input with 3.5mm audio connector
• Allows advanced HDMI display devices to be used with legacy VGA sources

Long distance HDMI extension

• Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

Auto-switching

• Selects active input when sources are connected or if there is a change in source power status
• Eliminates need for complex control system in small AV systems

Front panel Display On/Off control

• Remotely controls display power state; provides alternate 'Display Mute' mode
• Eliminates need for manual operation of display or use of IR remote control

Auto display control

• Automatically changes projector power state as sources are connected or removed from inputs
• Eliminates need for complex control system in small AV systems

Front panel Input Select button

• Overrides auto-switching when two active sources are present
• Simple manual control allows presenter to maintain control of AV system

Optional "No Button" US faceplate

• AT-HDVS-TX-WP-NB Accessory Blank Face Plate
• Allows input control only from 3rd party switcher
• Allows the presenter to control the meeting